|Company Name||Shenzhen Lianhuan silicone Materail Co.,Ltd|
|Country/Region:||Guang Dong - China|
|Last Online:||02 Aug, 2017|
printing most natural and synthetic fabrics, strong adhesive with silicone rubber products,including elastic fabrics for garments,Jerseys,Hats & caps, swim caps,Sweaters,Jackets,Gloves,Sleepwear,Pants & shorts,Bathin
l Easy and simply operation 10A:1B with normal printing process
l Catalysed by plantinum, nontoxicity and non-corrosiveness
l No solvent or cured by products
l Non pollution environment, environment friendly silicone ink,
l Non harm to human body. caused by the organic solvent into environment friendly, innoxious ink
l Non cause environmental problems when test and destroy ester of silicone ink.
l Silicon Ink with SGS approval,the silicone ink based on safety design easily pass any international inspection
l Cured silcione in with high elastic,soft smooth hand feeling when touch, slipry,high strechable and non bleeding
l adhered on textile fiber well after being cured and forms elastomer of silicone .
l good ink for silicone rubber products and latex with great adhesive.
l Produce high tear strenth, create high quality printing effect.
l moderate fluidity and cure time application. Easy process
l Low and higher teperature resistance(-50 to 300)
l Special silicone elastomer recovery capacity,flexibility,velvet, resistance to oil,solvent,and other etc,
l no harm to human body caused by the organic solvent into environment friendly, innoxious ink
please kindly have look for below information for dry method and curing temperature:
1. According to different thickness of silicone ink, the curing time is different. Normal situation for mixing Part A: Part B =10:1 curing time is 50seconds with the temperature of 150℃(polyaddition process).
2. When the room temperature is above 25℃ (humidity 50%), room temperature cure can be carried out under summer condition
3.Color master batch: Using it when needing various colors.
The curing time by using Screen mesh
The general proprtion of silicone gel and curing agetn is 10 1 and reaction as follow:
The ink will be cured at 2 Min.30 Sec. at temperatreture 100 ( by 90 mesh)
The ink will be cured at 1 Min.30 Sec. at temperatreture 120 ( by 90 mesh)
The ink will be cured at 50 Sec. at temperatreture 150 ( by 90 mesh)
The ink will be cured at 2 Min at temperatreture 100 ( by 150 mesh)
The ink will be cured at 1 Min.Sec at temperatreture 120 ( by 150 mesh)
The ink will be cured at 40 Sec at temperatreture 150 ( by 150 mesh)
lianhuan group limited